Brothers high frequency

Focus on high frequency without sewing machine

News Center

  • Tel: 086-0769-85586089
  • Contacts:Mr.tong
  • Fax: 086-0769-85828869
  • Address: No. 38, Chek Lap Ling, West Ring Road,Houjie town,Dongguan,Guangdong,China

Operation requirements of high frequency fuse
From: Dongguan brothers high frequency Machinery Co., Ltd. Post date: 2017-07-07

1, replace the new cutter, if the height is different, according to the set method re set.
2. When working, the cutter shall be placed in the middle of the upper plate as far as possible, so as to avoid mechanical unilateral wear and tear and affect its service life.
3. Avoid overloading and damage the machine so as to prolong the service life.
4. If the operator needs to leave the position temporarily, press the brake switch or turn off the motor, so as not to damage the machine due to improper operation by others.
5. Cut the upper platen, the slider and the brake. Add lubricating oil once a day to ensure smooth sliding of the upper platen.
6, when the cutter set, must first relax the fixed handwheel, so that the set rod contact the cutting point control switch, otherwise, when the cutter setting switch to ON, can not produce the set action.
7, when the cutting action. Hand please leave the knife or pad, strictly prohibited to use hand to support the knife mold and cutting, so as to avoid accidents.
8, fixed on the oil block, the valve has been set by the manufacturer correct, do not arbitrarily adjust, so as not to set pressure is too high, the oil system is damaged.